Please help me out !!! or point me to solution

[Scorpioo42]

now I got to find me config files/settings fot the config files for the BTT MMB 1.1 for the ercf v2

 

[rokapet]

32 minutes ago, Scorpioo42 said:

now I got to find me config files/settings fot the config files for the BTT MMB 1.1 for the ercf v2

Does your printer work without issues, apart from ERCF? If not, you may troubleshoot before you start to add ERCF related config!

[Scorpioo42]

when I grey out all concerning the ercf v2 my printer works flawlessly

As soon I try to put them to work again (delete the # ) nothing works , I think untill I fix the errors ..so I cannot print with the ercf v2 configs in place

 

Edited December 18, 2024 by Scorpioo42

[rokapet]

21 minutes ago, Scorpioo42 said:

when I grey out all concerning the ercf v2 my printer works flawlessly

As soon I try to put them to work again (delete the # ) nothing works , I think untill I fix the errors ..so I cannot print with the ercf v2 configs in place

Where is the ERCF config from? If from a sample file or someone elses config, most probably you will need to adapt is to your hardware!

[Scorpioo42]

I have a sample config file from BTT MM CAN 1.1 (which I have ) and now i renamed the mmu.cfg and made a new one and pasted the content of it in the new mmu.cfg

Now the errors make a bit more sense because the are about  wrong naming of fi MMU_GEAR_UART=PA10

I'm sure it has to be called  something else , what ..I got to search for /find out

 

Edited December 18, 2024 by Scorpioo42

[Scorpioo42]

Wow, You will not believe this.

I uninstalled Happy-Hare ....deleted the directory with WinSCP.  Installed it again and calmly thought about the first error.

Saw that at the last line in mmu.cfg ther was            MMU_POST_GEAR_11={gear_sensor_11_pin},

I removed {gear_sensor_11_pin}  as I saw no logical sense for it .

Fluid restarted klipper and ..all is fine ...NO ERRORS??!!!

Printer is on and working yeaha..Now going to try to move a thing ...may be light on the leds first to be sure I don't bump into the ERCF or destroy anything

 

It's looking good

Also curious if all is still well after powering off and on ...

 

Will post here again tomorrow how it turned out

 

[Scorpioo42]

 

All is working...except for the Binky sensor, think it's broke...mailed and they send me a new one.

Also the led light don't work ...checked the connection and all but nothing  soldered the neopixels ..working

 

Busy calibrating and setting things as should..had first filament moving to and from toolhead

 

Also trying to get the 5"screen to learn what is up and what down(flip x-ax) not ease to find

 

 

Edited December 19, 2024 by Scorpioo42

[mvdveer]

8 hours ago, Scorpioo42 said:

Also trying to get the 5"screen to learn what is up and what down(flip x-ax) not ease to find

If it is a BTT PiTFT  5"screen, this is achieved by flicking a switch on the back of the screen. (This is not available on the 4.3"screen)

[Scorpioo42]

No switch..

 

Has something to do with matrix of it..tried the known variations like

 

90° = Option "TransformationMatrix" "0 -1 1 1 0 0 0 0 1"

180° = Option "TransformationMatrix" "-1 0 1 0 -1 1 0 0 1"

270° = Option "TransformationMatrix" "0 1 0 -1 0 1 0 0 1"

 

To be set in raspberry pi  in /usr/share/X11/xorg.conf.d/40-libinput.conf

 

Just saw one that had Option "CalibrationMatrix" "1 0 0 0 1 0 0 0 1"   instead of "TransformationMatrix"  ,,,,   tried that but still no luck

When no-one has a DollaTek 5 inch HD TFT LCD touchscreen monitor display HDMI 800X480 voor Raspberry Pi  i'm afraid it's trial and error

 

 

Update ..GOT IT ...also solved

Was indeed a line in the 40-libinput.conf  file

 

Edited December 20, 2024 by Scorpioo42

[Cosmo]

On 2024/12/18 at AM2点56分, rokapet said:

我没有 ERCF 或任何 MMU，因此我无法评论将 ercf.py 放在任何地方，但上面的配置部分将文件的路径增加了三倍。它应该是：

 

“此外，我得到了错误

部分‘ez_driver1’不是有效的配置部分“

这意味着您的 Printer.cfg 中有一个同名部分（或链接到 Printer.cfg 的另一个配置文件中），而这是 Klipper 未知的关键字。不确定它是否与 ERCF 相关。

Thanks for your answer,I have the same qustion