QA Inspection

[TitusADuxass]

The head QA Inspector paid a visit this morning, she recommends a Toolhead change to fix the part cooling problems.

[claudermilk]

It's always good to have the QA department show up to check things out.

[Dirk]

2 hours ago, TitusADuxass said:

she recommends a Toolhead change to fix the part cooling problems

something like this: https://github.com/Armchair-Heavy-Industries/Xol-Toolhead/tree/pre-release

or this? https://github.com/Armchair-Heavy-Industries/Archetype/tree/main/Archetype - Mjolnir

[TitusADuxass]

1 hour ago, Dirk said:

something like this: https://github.com/Armchair-Heavy-Industries/Xol-Toolhead/tree/pre-release

or this? https://github.com/Armchair-Heavy-Industries/Archetype/tree/main/Archetype - Mjolnir

No, she likes the look of this - https://github.com/sneakytreesnake/CrownCooler?tab=readme-ov-file

[Dirk]

Your cat sure can pick

I see you'll need to use an ebb36 and will lose most of the options for leveling.

18 hours ago, TitusADuxass said:

Only euclid and klicky probes are compatible 

 

Edited May 24, 2024 by Dirk

[TitusADuxass]

15 hours ago, Dirk said:

You cat sure can pick

I see you'll need to use an ebb36 and will lose most of the options for leveling.

As it uses the standard voron XY carriage I'm thinking about either a MicroProbe or Eddy in place of the Omron.

I've ordered an Eddy, but from what I read it's probably going to be as reliable as BTT's SFS.

[Dirk]

It specifically specifies just those two (euclid is a pcb version of klicky) are supported.

The cad shows that the location for the omron probe is utilized to bypass the big ring of the toolhead and attach klicky to it. so your omron or btt won't fit.

[TitusADuxass]

20 hours ago, Dirk said:

It specifically specifies just those two (euclid is a pcb version of klicky) are supported.

The cad shows that the location for the omron probe is utilized to bypass the big ring of the toolhead and attach klicky to it. so your omron or btt won't fit.

Aaah, I didn't see that.

I'll take a look at the 2 that you proposed earlier.