Eddie Current Probe Comparison - a PERSONAL viewpoint

[mvdveer]

5 minutes ago, sleepster217 said:

I am not sure if u have or not but I have the stick on bamboo labs silicone nozzle brushes on mine and can link the stl I used if u want it but u may have all rdy changed over

I have already converted all printers to the Bambulabs silicone wipers, thanks

[sleepster217]

56 minutes ago, mvdveer said:

I have already converted all printers to the Bambulabs silicone wipers, thanks

All good did not like the fact that the bronze ones bend and don't work well after a little while and silicone just stays good well that was my theory 

[PFarm]

Has anyone used the Beacon reasonance test? Documentation is a little vague on how to use it.

[Penatr8tor]

1 hour ago, PFarm said:

Has anyone used the Beacon reasonance test? Documentation is a little vague on how to use it.

That's probably because there's not much to it.

Just plug this into your printer.cfg

[resonance_tester]
accel_chip: beacon
probe_points: 150, 150, 20

Probe points is the toolhead position for testing.

Then just run

TEST_RESONANCES AXIS=X

and 

TEST_RESONANCES AXIS=Y

and the rest of the SSHing and making graphs etc.

Here's the link to klipper so you don't have to hunt around.