Voron Build Tools Mega-List - 2024 Edition

[TitusADuxass]

I have found this hand drill to be useful on many occasion, just what you need when there's some reaming required.

EsportsMJJ 0,5-8 mm Mini Hand Drill Mit Keyless Chuck Pin Vise Modell Hand Drill : Amazon.de: Baumarkt

[Wannabe]

A very handy tool indeed, very useful for those more delicate jobs such as reaming or drilling out the smaller size holes. I usually clean out my 3mm inserts with a tap after pressing them in with the soldering iron. You can also find them on places like Ali Express, Temu etc.

[Wannabe]

Yet another useful tool.

https://www.amazon.com/Hobbypark-0-14mm-Puncher-Reamer-Drills/dp/B01EIH573K

Also available from Ali Express, Temu.

 

[Penatr8tor]

13 hours ago, Wannabe said:

Yet another useful tool.

https://www.amazon.com/Hobbypark-0-14mm-Puncher-Reamer-Drills/dp/B01EIH573K

Also available from Ali Express, Temu.

 

Yup, and if you go back one page, you'll find that I already posted this tool last October. 

I will say this about those tools though... I have two of them, one has about 2-3 degrees more taper than the other one. So, if you are in the market... The tool with a bit less taper works better i.e. removes more material per twist. 

This is the more taper one - Doesn't work that well for 3D printed holes.

This is the less taper one - Better for 3D printed holes.

[Reg_B]

Hi,

 

 I am new to building Vorons, but have worked my way through a couple of Deltas.

I would add a few Allen keys of the screw driver type.

Perhaps a torque limiting screwdriver and the torque gauge that Prusa suggest s to print and attach to a regular L  Allen wrench.

I just posted a thread about a "square" that I plan to use for my 2.4 kit (just ordered an hour ago,)

Not just a tool, but potentially a frame stiffener if I leave them in.

 

[Reg_B]

Here is the little "square" that I made.

NOTES:

1) it ain't perfect, but I think it will be usefulcorner-brace-3.STL

2) I wanted to go as deep into the 2020 slot as practical - without my actual kit and no CAD drawings of the 2020's section I was only able to estimate the edge flange as 2 mm thick.

3) The only CAD drawings I have of Tee nuts for this are for 5mm slide in ones and they go 1.4 mm into the slot from the inside, so I made allowance for them to come in that full 1.4 mm.   For NOW I am printing those in ABS, the mid term plan is to use roll in nuts.

 

 

 

Tee Nut.SLDPRT

[Reg_B]

In a previous career I once heard a tech get bawled out for a) using the "wrong" end of an Allen key b) for asking for a ball end key.

 

[TitusADuxass]

A SIM card removal tool makes a great de-pinner for connectors.

 

[PFarm]

I retired my old multimeter, which I used at work for over 20 years. I thought I'd give this meter from Aliexpress a try, I have to say I'm impressed shipping was quick, at $32.00 CND it was worth the gamble. Multimeter

Nice features and the large digital display is great, eyes aren't what they used to be. 

Edited June 13, 2024 by PFarm